Alto Ultima® Tower

The Height of Safety

The Task: Make the best better

ALTO Ultima® represents a revolutionary step forward in tower safety, making fall restraint and fall arrest fully available to tower users.

Independently tested and accredited to BS EN 795, our patented fall arrest bracket gives users & specifiers of access towers a massive increase in protection from the single biggest source of death and injury on construction sites today.

The result:

A tower like no other

Using the enormous strength and ruggedness of our existing HD tower range, we have designed this product to give the ultimate in additional protection to users. No other tower is durable enough to provide this facility.

We have taken the Alto HD tower, the best, most versatile, strongest and safest tower on the market – and taken it to the next level. If you are serious about tower safety – specify ALTO Ultima®.

Features

ALTO Ultima® has many safety & cost-saving features that puts it at the forefront of the access tower market.

Ultimate Protection

3mm Thick Tube

Scaffold Compatible

Fully Welded

Head Fittings

2500kg Capacity

Ultimate Fall Protection

ALTO Ultima® adds fall restraint and fall arrest protection to the existing EN 1004 compliant ALTO Heavy Duty Access Tower. Using the HD tower guard railing and toe boarding provides the ultimate in risk reduction for your work site.

3mm Thick Tube

The use of durable 3mm thick aluminium tube means wear & tear damage is dramatically reduced. It is 4 times more resistant to denting and crushing than the lightweight tower alternatives.

Scaffold Compatible

The ALTO Ultima® Tower - like the rest of the ALTO Access range - is manufactured using 48mm diameter tube, the same diameter as traditional steel scaffolding. This means adaptations and tying in is very easy because you can use standard tube & fittings which you cannot with a lightweight system.

Fully Welded Joints

Every welded joint on the ALTO Ultima® Tower is fully welded 360O around the tube. This means fractured welds are a thing of the past and make the tower a much more rigid structure with joints 5 times stronger in tension & 13 times stronger in bending.

Non-jamming Head Fittings

The ALTO conical head fittings prevent frames from jamming when dismantling towers so hammer damage is totally eliminated. An additional benefit of the head fittings is the frames automatically lock together during assembly, eliminating the requirement for flimsy, awkward spring clips that can be lost or damaged and render the tower unusable.

2500kg Load Capacity

The ALTO Ultima® Tower has a load capacity of 2,500 kg (2.5t) per mobile tower (3,000 kg if using base jacks) compared to between 650 - 950 Kg maximum for lightweight competitor products - reducing health & safety risks whilst increasing the range of applications available.

Videos

Gallery

Downloads

Product

Leaflet

(PDF, 1.5 MB)

Assembly

Guide

(PDF, 5 MB)

Product

Datasheet

(PDF, 0.4 MB)

**NEW**

SCAFFOLD PRODUCTS

TOWER PRODUCTS

OTHER PRODUCTS

SUPPORT

ABOUT

T: +44 (0) 1527 500 577 E: sales@altoaccess.com



HOME
ABOUT
PRODUCTS
NEWS
SUPPORT
CONTACT

Ultimate Fall Protection
ALTO Ultima® adds fall restraint and fall arrest protection to the existing EN 1004 compliant ALTO Heavy Duty Access Tower. Using the HD tower guard railing and toe boarding provides the ultimate in risk reduction for your work site.
3mm Thick Tube
The use of durable 3mm thick aluminium tube means wear & tear damage is dramatically reduced. It is 4 times more resistant to denting and crushing than the lightweight tower alternatives.
Scaffold Tube Compatible
The ALTO Ultima® Tower - like the rest of the ALTO Access range - is manufactured using 48mm diameter tube, the same diameter as traditional steel scaffolding. This means adaptations and tying in is very easy because you can use standard tube & fittings which you cannot with a lightweight system.
Fully Welded Joints
Every welded joint on the ALTO Ultima® Tower is fully welded 360O around the tube. This means fractured welds are a thing of the past and make the tower a much more rigid structure with joints 5 times stronger in tension & 13 times stronger in bending.
Non-Jamming Head Fittings
The ALTO conical head fittings prevent frames from jamming when dismantling towers so hammer damage is totally eliminated. An additional benefit of the head fittings is the frames automatically lock together during assembly, eliminating the requirement for flimsy, awkward spring clips that can be lost or damaged and render the tower unusable.
2500kg Load Capacity
The ALTO Ultima® Tower has a load capacity of 2,500 kg (2.5t) per mobile tower (3,000 kg if using base jacks) compared to between 650 - 950 Kg maximum for lightweight competitor products - reducing health & safety risks whilst increasing the range of applications available.